FLUSHTANKIRAN - Cistern

Sanitary ware Online Shop

Product Category

Latest Products

Download Center

کاتالوگ فلاش تانک ایران | بروشور فلاش تانک ایران

Catalogs,
Price Lists and All You Need

In order to see all the products manufactured by Flush Tank Iran before purchasing, Simply take a look at our catalogs provided here. Click here to download all the Catalogs, Brochures and Product Images.

Before image alt After image alt

Flush Tank Iran, In a Glance

In FTI we aim to present innovative quality products and superior services and continuously improve the quality and hygiene level of people’s lives and save water resources of the planet by the use of our 40 years of experience, engineer’s knowledge and modern machineries. Since the day it all began we’ve been pursuing the goal of presenting various products with innovative functional designs and setting new standards in our field to improve hygiene level. We strive to achieve a harmonious balance between business, environmental and social goals.

Since 1981

The First Manufacturer
Cistern in Iran
40 سال سابقه فلاش تانک ایران
System Installation
0 +
Active Sales Representative
0 +
Expert Staff
0 +
Product Variety
0 +

Services

فعالسازی گارانتی محصولات | گارانتی فلاش تانک ایران | خدمات فلاش تانک ایران

FAQ

سوالات متداول درباره فلاش تانک ایران

Floater’s water level is higher than allowed. During installation, it must be ensured that all parts of the flush tank are free in their range of motion and are not involved with other parts. In case of floater,lever or any of their parts being engaged with another part the water flow will not start/stop. Check the pump’s diaphragm rubber.

In this case, the pump should also be opened and turned 180 degrees so that its chassis is aligned in front of the plate. Now the floater and the pump are sided perfectly. For additional information you can check the provided installation manual. You can download it from our website.

Remember to drain the cistern before closing the cover and make sure all 8 pins are perfectly fitted.

Make sure floater’s ball is perfectly placed in front of water entrance and can move easily without any interruptions.

Adjust the distance between the pin behind the plate and the chassis above the pump. Normally, it should have one millimeter margin.

To tighten the screws beneath the pump, first tighten the big screw completely, then go for the small ones, This will reduce any chance of breaking the small screws or leave the big one loose.

No, You don’t need any special tools to install or tighten the siphon connections, However if you need to change the floater’s water intake location to floor water intake, you can use the tool provided, according to the brochure.

To solve this problem, according to the instructions in the manual, remove the drain chassis from the tank and place the pin behind the key one tooth towards the inside of the key and tighten the pin behind the key again. And before draining the tank, close the lid so that all the eight tabs of the tank are completely in their correct position.

Welcome to Flush Tank Iran